Materials
Material selection is key to your process, and its suitability will depend not only on the medium, but also on the flow rate, temperature and pressure of the system. Badger Meter valves can be manufactured in a wide range of materials.
Standard cast valves are available in carbon steel, AISI 316 stainless steel, 1.4571 and 1.4581 stainless steel and Hastelloy C4. For other materials, the valve will be manufactured from solid bar. The trim will normally be manufactured from the same material as the body, but this will depend on the pressures involved as some of the smaller trims will need to be manufactured from high strength materials.
Options include:
Body and bonnet Material
- 316/316L stainless steel
- 304/304L stainless steel
- 347 stainless steel
- Brass
- Bronze
- Carbon steel
- Monel
- Alloy 20
- Alloy B
- Alloy C
- Alloy G
- Inconel®
- Titanium
- Tantalum
- Nickel
- Kynar®
- Zirconium
- DIN 1.4581 SS
- DIN 1.4571 SS
- DIN 1.4539 SS
- DIN 1.4404 SS
- DIN 2.4819 Hastelloy C-276
- DIN 2.4617 Hastelloy B2
- Aluminium
- Duplex stainless
- Haynes® HR-120
Trim Alloys/Seat
- 316/316L stainless steel
- 304/304L stainless steel
- 347 stainless steel
- 316/Kel-F
- 316/ PTFE
- 316/Stellite®
- Monel
- Alloy 20
- Alloy B
- Alloy C
- Hastelloy® C22
- Inconel
- Titanium
- Tantalum
- Nickel
- Kynar (PVDF)
- Zirconium
- Duplex stainless steel
- Stellite/304
- Stellite/316
- Stellite/416
- Stellite/Alloy 20
- Stellite/Alloy bronze
- Stellite/Alloy B
- Stellite/Alloy C
- Stellite/Monel
Downloads (opens in new tab):